Frequently Asked Questions
Q. Can I retrofit other bait tanks besides the
SuperBait Tank II?
A. Yes. A mounting hole (1-1/8" dia. for the LRV; 1-1/4
dia. for the LBRV) will have to be drilled
through the divider wall between the filter compartment and the bait
compartment. This should be located to either side of the filter box as
close to the bottom as conveniently possible. This will allow the bubbles
to stay in the water column longer and release as much oxygen to the aerated
water as possible before rising to the surface.
Q. Where should the venturi be located in
respect with the recirculation pump.
A. The venturi should ALWAYS be located
downstream of the pump and as close as possible to where the water discharges
back into the bait compartment. The closer the better. See "How
To" page.
Q. How are the venturi sized?
A. The #5 Venturi is designed to match 350 to 500 gph pumps. The
#8 Venturi was designed to match 750 to 800 gph pumps. However we have found that the #8 works very well
with 500 gph pumps in tanks less than 36" deep. The #11 Venturi is designed to match 1000 to 1100
gph pumps.
See "How To" page
for additional suggestions.
Let 'em Live™
